New Catalyst Enables Hydrogen Production from Seawater Using Low-Cost Materials

November 19, 2026

A team of researchers at the University of Sharjah, United Arab Emirates, has developed a catalyst that could make hydrogen production from seawater more economical. The solution uses relatively abundant and low-cost materials and demonstrated the capacity to operate for about 80 hours in simulated seawater, without significant loss of performance.

The study, published in the scientific journal Chemical Communications, describes a catalyst composed of nickel hydroxide, cerium oxide, and phosphate. The combination aims to overcome one of the main obstacles to the direct use of seawater in hydrogen production by electrolysis: the presence of salts that can corrode the materials used and interfere with the chemical reactions required for the process.

Electrolysis involves using electricity to split water into hydrogen and oxygen. Currently, the process generally relies on purified water, which adds costs and can represent a limitation in regions where freshwater is scarce. The possibility of using seawater without the need for desalination or intensive treatment could reduce these costs, especially in coastal industrial facilities.

However, the high concentration of chloride ions in seawater poses technical difficulties. In addition to promoting corrosion of the catalysts, the salt can trigger undesired reactions that produce chlorine and other potentially toxic by-products, rather than facilitating the release of oxygen.

According to the researchers, the combination of nickel, cerium, and phosphate improves the selectivity of the reaction and the resistance to corrosion. The material also forms nanostructures in the shape of small pyramids, which increase the surface available for chemical reactions.

“In a durability test, it operated continuously, with high production, for about 80 hours in simulated seawater, without degrading or losing performance,” explains Tanveer Ul Haq, assistant professor of Chemistry at the University of Sharjah and co-author of the study.

The materials used could also facilitate larger-scale production. Nickel is relatively abundant and economical, cerium has more limited availability, but is accessible, and phosphate is a common compound. The combination contrasts with some high-performance catalysts that rely on rare and expensive metals, such as platinum and iridium.

The technology could be of interest to industrial sectors with high energy needs that are difficult to satisfy solely through direct electrification, such as steel production, maritime transport, and heavy road transport. It could also be relevant for coastal regions and island territories with limited access to freshwater.

Despite the promising results, the solution is still far from commercial viability. The around 80 hours of stable operation constitute an initial laboratory result, but an industrial facility will require much longer operating periods, in addition to testing under real conditions and an assessment of the overall cost of the process.

Hydrogen produced with renewable electricity could help reduce emissions in hard-to-decarbonize industrial activities. However, the environmental contribution of this technology will depend on the source of the electricity used and the ability to ensure durable, efficient, and economically competitive production.

Thomas Berger
Thomas Berger
I am a senior reporter at PlusNews, focusing on humanitarian crises and human rights. My work takes me from Geneva to the field, where I seek to highlight the stories of resilience often overlooked in mainstream media. I believe that journalism should not only inform but also inspire solidarity and action.